Device with front panel which allows you to control roller shutters, roller blinds and blinds with electric drive.
You can set two comfortable positions of roller shutter to each group.
The device is connected to 230 V (L + N) network and motor engine directions (UP + DOWN).
123 control groups can be simultaneously recorded in the receiver. In this case, non-priority signals can be blocked.
Any decorative frames of the popular European standard 50×50 mm are applicable to the Nero II 8413-50.
The device supports remote programming of central remote controls and radio remote controls.
The device has 4 operation modes:
Short command mode for simultaneous operation with other automatics devices;
Roller shutter mode for raising and lowering of roller shutters;
Louvered mode for raising / lowering and rotation of slats of blinds;
Continuous command mode for turning on/off the lighting, other electric load.
The device has been inspected and has all the necessary certificates for installation in Russia, Belarus, Kazakhstan and Ukraine.
|Nero II 8413-50|
Degree of enclosure protection
Country of manufacture
Installed on the wall in mounting cup.
You can control the automated Nero II 8413 UPM device using:
keys of front panel;
remote controls of Nero II system;
Nero II executive devices with front panel in the “OWN GROUP” mode.