Structures or loads in the Nero II system can be controlled by switches, sensors or timers from third-party manufacturers. To do this, the Nero II 8410 UP remote control is connected to the automation devices, which is easily hidden by the finishing or in the mounting cup.
The module for hidden installation allows to control motorized roller shutters, blinds or roller blinds, lighting, sockets and the automatics of gates and barriers.
Device with front panel which allows you to control motorized roller shutters, blinds or roller blinds, lighting, sockets and the automatics of gates and barriers.
Used when central remote control and executive devices are connected to different phases of mains supply.
The transcoder is needed to organize a radio-frequency bridge in the case when the Nero II actuators are located in neighboring buildings, but are connected to different supply lines. It allows you to use any radio remote control Intro II to control Nero II executive devices and the other way round.
The 99-channel remote control with the function of setting 32-week timers for different groups allows to centrally control various objects of a Smart Home: roller shutters, blinds, roller blinds, gates, irrigation systems, lighting, sockets and other electrical loads.
A 9-channel remote control to operate roller shutters, roller blinds, gate awnings, as well as other electrical loads via the 230V network.
Designed to control roller shutter or roller blind with electric drive.
The device can be placed in a roller shutter box, when the decorative finishing of the object is completed, and any wall chasing is prohibited.
Single-channel command executor is designed to control various electrical loads as part of the Nero system: electric drives for roller shutters, roller blinds, as well as incandescent bulbs and automation units for gates and barriers.
The command executor with a front panel is a receiver designed to control an electric actuator of roller shutters, roller blinds or blinds as part of the Nero system.
Used when central remote control and executive devices are connected to different phases of mains supply.
Designed to combine intelligent control system over the 230V network Nero and the radio control system Radio. It allows you to use any Radio remote control to control Nero executive devices and the other way round.