Low-voltage receiver for gates and barriers automation unit control. This will allow the use of universal remote controls to oprtayr both gates and roller shutters at the facility.
The signal of the receiver is encrypted, therefore it is almost impossible to copy remote controls.
Convenient for installation inside of the gate automation unit.
It is necessary in places with a large number of users (barriers, rolling gates in office buildings, etc.).
The signal range is increased several times even in the most difficult conditions with several receivers.
The receiver has 2 modes of operation:
single-channel mode: used to control one object - the first channel is responsible for the "UP" direction, the second - for the "DOWN" direction;
two-channel mode: to control two objects connected through one common input of the radio card.
The device has been tested and has all the necessary certificates for installation in Russia, Belarus, Kazakhstan and Ukraine.
Gross weight
|
61 g |
Overall dimensions
|
98×32×22 mm |
Warranty lifetime
|
2 years |
Model
|
Radio 8117 micro |
Manufacturer
|
Nero Electronics |
Degree of enclosure protection
|
IP55 |
Country of manufacture
|
Belarus |
To the wall of the gate control unit from the inside with adhesive tape or self-tapping screws.
The automated by Radio 8117 micro structure can be controlled with transmitters of Radio system.