Designed to control roller shutters, blinds, roller blinds with electric drive.
You can set two comfortable positions of roller shutter to each group.
You can use an IP65 sealed case to install the device outdoors.
There is a convenient programming button on the device case to control the roller shutter during installation works.
507 control groups can be simultaneously recorded in the receiver. In this case, non-priority signals can be blocked.
The device supports remote programming of central remote controls.
The device has 4 operation modes:
Short command mode for simultaneous operation with other automatics devices;
Roller shutter mode for raising and lowering of roller shutters;
Louvered mode for raising / lowering and rotation of slats of blinds;
Continuous command mode for turning on/off the lighting, other electric load.
The device has been inspected and has all the necessary certificates for installation in Russia, Belarus, Kazakhstan and Ukraine.
|Nero II 8413 UPM|
Degree of enclosure protection
Country of manufacture
Installed in an apartment under the switch, outdoors in an additional sealed case IP65.
You can control the automated Nero II 8413 UPM device using:
remote controls of Nero II system;
Nero II executive devices with front panel in the “OWN GROUP” mode;
two-key self-return switch;
single-key self-return switch.